Danobat Prosaw

Automatic Band Saw Machines

There are a wide range of automatic bandsaws to suit every application depending on the size of the bar or billet you wish to cut and the hardness of material you wish to process with bandsaws that have been designed for non ferrous material such as aluminium, brass, copper or other non ferrous material and bandsaws designed to cut ferrous material, such as normal steel and the harder stainless steel and nimonic steels.automatic bandsaws

The design of the automatic bandsaw will depend on the application with the most common bandsaws being of pivot design and the automatic feed system being a shuttle or vice feed mechanism or the more cost effective rocker feed automatic system.

With a vice feed or shuttle type automatic bandsaw the required component length is programmed into the machine and the rear vice moves to this programmed position and indexes the stock material forward to be cut. This will continue until the number of pieces programmed has been achieved or the bandsaw has run out of material.

With a roller feed automatic bandsaw the number of components is again programmed into the bandsaw and vertical powered rollers propel the bar through the bandsaw until it reaches the programmed length with the length being measured by an encoder in the powered feed rollers.

When cutting harder steel such as stainless or nimonic steel, or when cutting larger diameter steel, twin column automatic bandsaws are considered a more efficient and productive machine. These bandsaws are by design, more rigid and usually are fitted with a wider bandsaw blade to give higher performance and better blade life and usually are only supplied with the vice feed or shuttle feed automatic style of indexing the bar through the machine.

Listed below are some of our range of automatic bandsaws...



Waytrain WH5046HA

A High Specification Double Column Automatic Bandsaw with NC Controls, Powered Swarf Conveyor and Variable Blade Speed as Standard.


Waytrain WH4036HA

A High Specification Double Column Automatic Bandsaw with NC Controls, Powered Swarf Conveyor and Variable Blade Speed as Standard.


Waytrain LX330AE

A high specification pivot action automatic bandsaw with many standard features often optional extras on others of its type.


Waytrain WH300HA

A high specification double column automatic bandsaw with many standard features often optional extras on others of its type.


Waytrain LX250AE

A high specification pivot action automatic bandsaw with many standard features often optional extras on others of its type.

Contact Us

call 01536 410999

Call us during office hours (8:30am - 5pm, Mon - Fri) for assistance with choosing the best machine for the job.


Request Information

Fill in the form below, and we'll get back to you as soon as possible.