Prosaw Limited

Horizontal Band Saw Machines

Horizontal band saws cut through the stationary material with the blade running an the horizontal. With over 70 horizontal band saws available, Prosaw's range includes small manual or semi-automatic through to heavy duty automatic horizontal band saws. Different features of the horizontal band saws include mitre cutting with NC controls, They are suitable for a variety of material types including sectional, tube and solid profiles and many materials.

Listed below are some of our range of horizontal band saws...


Waytrain UE250A

Manual Horizontal Bandsaw, 4 Fixed Blade Speeds. More than 500 machines throughout the UK!

Waytrain UE250SSA

Manual Horizontal Bandsaw, Variable Blade Speed and One Way Mitre up to 45 degrees

Waytrain LX250AE

A high specification pivot action automatic bandsaw with many standard features often optional extras on others of its type.

Waytrain WE270DS

Dual operation mitre cutting bandsaw. Can be used either as a gravity feed machine or in pulldown mode.

Bomar Ergonomic 275.230DG

A simple and easy to use manual bandsaw. Two way mitring up to 60 degrees and a quick release vice.

Waytrain WH300HA

A high specification double column automatic bandsaw with many standard features often optional extras on others of its type.

Bomar Ergonomic 320.250DG

Manual Mitre Cutting Bandsaw with Quick Release Vice.

Bomar Ergonomic 320.250DGH

Quickset mitre bandsaw with semi-automatic operation. Easy head return setting from control panel and mitre cuts in both directions.

Waytrain UE330SA

A Heavy Duty manual bandsaw with an array of features including Powered Bow Raise, Variable Blade Speed, 34mm wide blade and Laser Cutting Line.

Waytrain LX330AE

A high specification pivot action automatic bandsaw with many standard features often optional extras on others of its type.

Waytrain WE350DSA

Pivot action semi-automatic mitre cutting bandsaw. Foot-pedal cycle start operation. Blade tension monitor.

Waytrain WH4036HA

A High Specification Double Column Automatic Bandsaw with NC Controls, Powered Swarf Conveyor and Variable Blade Speed as Standard.

Bomar Workline 410.280DG

Manual horizontal bandsaw with a swing head for easy mitring up to 60°

Bomar Workline 410.280DGH

Semi-automatic mitre bandsaw designed for cutting section material, digital readout as standard.

Waytrain WH5046HA

A High Specification Double Column Automatic Bandsaw with NC Controls, Powered Swarf Conveyor and Variable Blade Speed as Standard.

Bomar Workline 510.350DGH

Semi-automatic mitre bandsaw designed for cutting section material

Bomar Workline 610.450DGH

Semi-automatic mitre bandsaw designed for cutting section material

Bomar Individual 620.460DGH

Double mitre semi-automatic twin column bandsaw designed for cutting section material

Waytrain UE460DSAE

Very Heavy Duty Bandsaw equipped with a 41mm wide blade, variable blade speed, large vices and two way mitring up to 60 degrees.

Waytrain WL800SAT

A Large 800mm Capacity Bandsaw with Powered Table for Positioning Material.

Contact Us

call 01536 410999

Call us during office hours (8:30am - 5pm, Mon - Fri) for assistance with choosing the best machine for the job.


Request Information

Fill in the form below, and we'll get back to you as soon as possible.

Prosaw can demonstrate many types of horizontal bandsaws using different materials at their Kettering bandsaw showroom.